HDPE DN50mm Silicone Core Pipe
Offer Expiry Date
Place Of Origin
Min Order Qty
1000000 Meter per Week
Western Union, Money Gram, L/C, T/T
1. Normal packing( Standard exporting package, Plastic film or bulk). 2. As per customer's request.
within 14 working days
1 USD Meter
Outer wall of hardness : ≥59 Shore D）
Lining friction coefficient
Tensile strength（MPa）: ≥21
Elongation at break（%）: ≥350
Maximum traction load（N）: ≥8000
Cold bending radius（mm : 400
Nominal pressure（KN/m2 : ≥50
Brittle temperature ℃ :- 75
Melt flow rate g / 10 min MFR 190/2.16 ：≤0.5
1,The lining of the silicon core layer is solid, permanent lubricant;
2,The lining of the silicon core layer is pressed by synchronization in high density polyethylene pipe wall, and evenly distributed throughout the pipe wall, not peeling off.
3,The lining of the silicon core layer does not react with water, wash water pipe after an accident.
4,The lining of the silicon core layer and high density polyethylene with the same physical and mechanical properties;
5,Internal friction characteristics of silicon core layer remains the same, cable in the pipe can be extracted repeatedly, blowing method, one can blow cable 1000 m or above